Low Pressure Water Quick Fixes and Water Pressure Pump

From time to time, you might be experiencing a low water pressure on your plumbing system. It is a big issue for homeowners to have a low water pressure. It’s an inconvenience to not be able to water the garden while washing the dishes. If this is the case, it’s best to take necessary action by locating the source of the problem and finding solution on how to fix it.

According to Don Vandervort, there are couple reasons for having a low water pressure.

Water pressure may be low for a couple of reasons. If all of your neighbors have low water pressure, there may not be much you can do except to contact your water supplier and complain about the problem.

If your home is the only one with low pressure—or if only parts of your house have low pressure—then there is probably a constriction in your pipes or valves. The most common cause of low water pressure in a home that’s more than 20 years old is older steel pipes that have become clogged with lime deposits that strangle the flow of water. Unfortunately, to solve this problem, you usually need to have a plumber re-pipe your home. But before you go down this road, do the following. read more…

Don Vandervort of Hometips also suggested these quick tips on how to locate and fix low water pressure.

How to Solve Low Water Pressure Problems

If low water pressure is at a single fixture:

If the problem seems to be at a single faucet or shower head, check for a flow restriction, clogged aerator, dislodged washer, or partially closed supply stop valve. If a faucet has an aerator, check that first; remove it and clean it out, then replace it.

If low water pressure is throughout your house:

Go out to the street and locate your water meter. There should be a shutoff valve next to the meter—in fact, there may be one on each side of the meter as shown in the illustration at right. Be sure the valves are entirely open—turned counterclockwise as far as they will go. If you discover that a supply valve is partially closed, opening it should solve the problem.

If and when these quick low water pressure fixes does not work, it is best to find another option to fix the problem, which is to have your plumbing contractor install a water pressure pump.

What Is a Water Pressure Pump?

Also known as a water pressure booster, water pressure pumps to increase the pressure of incoming water from your well or city water supply. As water flows into the tank, compressed air pressurizes the output, giving it the boost needed to flow throughout your house.

While shopping for a water pressure pump, there are a few key features you should consider. You will want to make sure the tank and the motor are large enough to make an impact on your home’s water pressure. Consider how the water pressure pump operates, such as manual and automatic shut-offs. Some water pressure pumps come equipped with different modes, allowing you to choose how much water and energy you conserve. Finally, you may want to consider a water pressure pump with quiet noise ratings, depending on where your water main is located. Read full article here.

The best option to fix low water pressure is to call your plumbing contractor and have them check the real source of the problem.

  • Share on Tumblr
November 13th, 2017 by Lief Simons
About Lief Simons

Lief Simons is the President of Plumbers Edmonton Ltd., which specializes in plumbing, heating and cooling installation, repair and servicing. For same day 24/7 service, call 587-408-3450.